Hubbell Killark

B7C Series

Circuit breaker enclosures are designed for petroleum refineries, chemical and petroleum plants with indoor and outdoor process. The B7C Series provides overcurrent and short circuit protection of service entrance, feeder or branch circuits, light, heating, appliance and motor circuits. Motor control and circuit protection in locations made for hazardous due to the presence of flammable gases, vapors, combustible dust, or ignitable fibers, flyings and areas which are subject to corrosion, weather and dampness.

Killark offers several different series of fittings for Standard Locations and Hazardous Locations. Each fitting offers a diverse solution for a specific application. Fittings are operator accessories that protect your wiring operation. Most fittings are suitable for wet locations when used with gasketed covers. Killark fittings can also provide access to conductors for pulling, splicing, and maintenance. All fittings are designed to meet area classifications for project applications.

B7 E Series

The B7 E Series are Junction Boxes Enclosures that are designed to house control stations, relays, starters, circuit breakers, terminal blocks and other equipment devices.

EXB Series

The EXB Series Junction Boxes applications are designed for locations that are hazardous from flammable gases, vapors, combustible dust, or ignitable fibers, flyings and areas which are subject to corrosion, weather and dampness. Enclosures are developed to house control stations, relays, starters, circuit breakers, terminal blocks and other equipment devices.

XB Series

The applications are designed for locations that are hazardous from flammable gases, vapors, combustible dust, or ignitable fibers and flyings. Enclosures are used as a junction or pull box or to enclose control stations, meters, relays, starters, terminals or other equipment or devices.

DB Series

DB Series Enclosure are designed for hazardous locations for the presence of combustible dusts, damp, wet locations or ignitable fibers or flyings.

TE/TI Series

TEF/TEB Series terminal enclosures for power and control circuits are used to link electrical wires. These enclosures are designed for hazardous, corrosive environment such as refineries, chemical plants, water treatment and bio gas plants. They are developed to withstand combustible gas-air mixture or combustible dust that may occur.

GE Series

GE Series conduit boxes with aluminum outlet bodies with terminal blocks are installed in conduit systems with hazardous areas to:

– Protect conductors in threaded rigid conduit
– Act as pull and splice boxes
– Change conduit direction
– Provide access to conductors for maintenance and future system changes
– Used to link electrical wires. Primary circuit brought into the enclosure is distributed to field control devices or sensors.

HK Series

The HK series Atex terminal box is used within hazardous areas to splice or terminate conductors by means of a terminal block. This series provides access to conductors for maintenance and future system changes. It is used to link wires and bring circuit into enclosure to distribute to field control devices or sensors.

XJB Series

The XJB series Junction Boxes applications are designed for locations that are hazardous from flammable gases, vapors, combustible dust, or ignitable fibers and flyings. These enclosures are installed at petroleum refineries, chemical and petrochemical plants, storage areas and other processing facilities where hazardous substances are handled or stored. Enclosures are used as a junction or pull box or to enclose control stations, meters, relays, starters, terminals or other equipment or devices.

CBH Series

The CBH Series circuit breaker handles are used for enclosures XB, XJB, DB. These devices may be used to activate circuit breakers, motor circuit protectors, and nonfusible disconnects. The handle devices include external handle and lockout, internal switching mechanisms, and adjustable shafts.

TBWE Series

The TBWE series offers mounting for, EXB, XB, XJB, GR, DB serried junction boxes. These components are designed for connecting and arranging control wiring for control panels and switching applications.

GR Series

The GR Series applications are designed for locations that are hazardous from flammable gases, vapors, combustible dust, or ignitable fibers and flyings and areas which are subject to corrosion, weather and dampness. These enclosures are installed at petroleum refineries, chemical and petrochemical plants, storage areas and other processing facilities where hazardous substances are handled or stored. Enclosures house meters, relays, terminal strips, control transformers and etc.

HK/2HK Series

HK/2HK  Series instrument device enclosures are used to measure, detect, monitor, transmit and control industrial processes and systems. This series meets domestic and international code requirements and is suitable for a wide range of applications.