Climate control plays a major role in today’s control systems. In order to manage the use of micro-electronics, it’s an important priority when controlling temperature to maintain a reliable performance. In order to correctly sustain temperature inside an enclosure, it must combined circulation of both cooling and heating to protect against costly system failures.
Filter Fans provide an economical fan cooling method for industrial cabinets to ensure enclosures do not overheat. Filtered passive ventilation is supplied by an exhaust filter for convection cooling or a fan forced air cooling system.
Heating power is programmed to provide electronic, pneumatic, hydraulic and mechanical equipment with protection of low temperatures, condensation and corrosion. Positive Temperature Coefficient (PTC), heater unit controls a solid temperature environment for enclosures, this allows critical components to execute safely and properly for long periods of time. Heating power is designed to adjust to the temperature for a secure and reliable course.
High BTU is designed for side mounting on any enclosure surface, where hot spot cooling or low capacity cooling is required. The closed loop cooling system ensures clean enclosed air and is circulated throughout system without mixing it with contaminated ambient air.
The side mounting series offers a variety of different enclosures, where hot spot cooling or low capacity cooling is required. The closed loop cooling system ensures clean enclosed air and is circulated throughout system without mixing contaminated ambient air.
Breather Kit accessories are provided for controlled pressured compensations due to temperature variations.
Electronic Humidity and Temperature Control, provides air temperature, humidity control, electrical monitoring and electronic enclosures. Its versatile design is effective in ATM’S, Parking control gates, ticket dispensers and traffic control systems, where the systems is constantly exposed to a wide range of weather changes.
Mechanical Humidistat works at temperatures 30-140 degrees and detects the preset level of humidity from the control of heater or fans.
Packaged Blowers are engineered for performance and built for reliability. Blowers use filtered airflow to cool components inside of the enclosure. To increase the performance of a blower, a second exhaust filter can be added. For best results, it is recommended that an exhaust filter be added in both the blower and the filter fan. If used, this will act both as an exhaust point for hot internal air and support the pressurization of the enclosure and reduces the risk of unfiltered air to enter in the enclosure.
A rainproof ventilator is designed to balance internal/external pressure and temperature. Ventilators prevent condensation by allowing enclosures to breath. The Ventilator is molded in corrosion resistant thermal set plastic to avoid any type of oxidation.
Thermostats are designed to control the air temperature within monitoring cabinets. Thermostat NC (Normally Closed) is for the control of heaters and heater fans. Thermostat NO (Normally Open) is for the control of cooling units, or for switching signal transmitters in case of overheating.
Top mounting is designed to perform closed loop cooling air to ensure clean enclosed air. Air is circulated within enclosure and contained to prevent from traveling outside in ambient air.
2 UD Two Door Wallmount and Floormount Disconnect Enclosures accept disconnect switches and circuit breakers such as:
– ABB Controls
– Allen Bradley
– CH Westinghouse
– GE
– Siemens I-T-E Max-Flex
– Square D
Enclosures are rated NEMA 12 with UL 508 and CSA Standards.
Single Door Disconnect Enclosures are rated NEMA 12,13. The product is designed to house Allen Bradley, 1494 F & D Series only. It provides a degree of protection from water, oil, dust and falling dirt.
Hammond Manufacturing 1414 Series Enclosures offers several different NEMA enclosures including the following:
– 1414 N4 PH-NEMA 12,13,4 Continuous Hinge, Clamped Cover
– 1414 N4 Clamped, Lift Off Cover
– 1414 PH-NEMA 12,13 Continuous Hinge, Clamped Cover
– 1414 SC-NEMA 12,13 Lift Off, Screw Cover
– 1414 Series Enclosures-NEMA 12,13 Clamped, Lift Off Cover
These enclosures are designed for instrument enclosures, electric, hydraulic and pneumatic control housings, electrical junction boxes or terminal wiring enclosures. Enclosures provide protection against falling dirt, dust, oil, water and environmental damage.
Hammond Manufacturing 1418 Series Freestanding Enclosures include the following:
– 1418 N4-NEMA 4 Single Door
– 1418 Two Door-NEMA 12 Single or Dual Access
– 1418 Single Door-NEMA 12 Single or Dual Access.
These enclosures provide a variety of inner panels, rack mounting rails and swing out frames. Enclosures are designed for housing electrical, electronic, hydraulic or pneumatic controls. Each freestanding enclosure has area for panel mounting or rack mounting for equipment. These enclosures all provide protection against harsh environmental weather and may be hosed down or wet for a specific application, in which corrosion may become an issue.
Hammond Manufacturing offers an extensive line of wall and floor mount enclosures. These specific enclosures are designed for housing electrical, electronic, hydraulic or pneumatic controls and instruments. Enclosures provide protection from falling dirt, water, oil and dust.
This series includes the following enclosures:
– 1422 Two Door Wallmount-NEMA 12 Continuous Hinge
– 1422 TwobDoor Floormount-NEMA 12 Continuous Hinge
– 1422 MD Multiple Door-NEMA 12 Continuous Hinge, Padlockable Doors
– 1422 Two Door Floormount-NEMA 4 Continuous Hinge, Clamped Doors
Hammond Manufacturing offers Modular Freestanding Enclosures-NEMA 12 Series, (IFMD Flange Mount Disconnect, IME Single Door, IMET Double Door and IPC PC Series enclosures). All in which offer similar applications. These product lines provide housing for industrial control and operator interface in harsh industrial environments.
Modular Freestanding Enclosures NEMA 12 (IME Series Single Door)
Modular Freestanding Enclosures NEMA 12 (IPC Series PC Enclosure)
Modular Freestanding Enclosures NEMA 12 (IMET Series Double Door)
C-Boxes
C-Boxes are used as a junction, pull or switch box.
N1 Panel Enclosures are designed to house components and controls and keep enclosed within device.
Splitter Boxes are designed for distribution of 600 V max and service using 3 to 4 wires. Splitter Blocks are used in Hammond standard Splitter Troughs and Splitter Boxes and are all rated 600 V. Splitter Blocks are designed with main and branch lugs, which can utilize aluminum or copper conductors.
This device provides mechanical protection for components that require ventilation. Ventilated Component Cases are suitable when the loss of energy converts to heat.
This product is a Non-Ventilated-NEMA 1 Panel Enclosure. It is designed to store indoor instruments, components and controls, that don’t require oil-tight or dust-tight protection.
This component is designed and used as a wiring/junction box. It provides protection against rain, sleet, snow or dripping water and keeps wiring from being damaged.
This enclosure is designed to be used as wiring and junction box. Enclosure provides protection against harsh weather such as rain, sleet or snow.
Cabinets are designed for indoor housing of metering transformers per Hydro-Quebec specifications.
This component is designed and used as a wiring/junction box. It provides protection against rain, sleet, snow or dripping water and keeps wiring from being damaged.
Metering Cabinets are designed for indoor housing of metering transformers.
This enclosure is designed to be used as wiring and junction box. Enclosure provides protection against harsh weather such as rain, sleet or snow.
Enclosure is designed for use as a wiring/junction box and contains wiring components. It provides protection from weather and keeps contents compact and secure.
1414 Enclosures are designed to house instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. Component provides a water-proof protection allowing equipment to be hosed down or cleaned.
1418 Enclosures are designed to protect components from environmental damage. Product is used to house instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. A wide range of inner panels, rack mounting rails and swing out frames are accessible and flexible in mounting arrangements.
1422 Components are designed to house electrical, electronic, hydraulic or pneumatic controls and instruments. Protection is provided for environmental damage to keep applications secured.
These Enclosures offer protection against harsh and industrial environments for wall mount applications. This product contains enclosure for electrical and electronic equipment. Series features hidden hinges and refined latching systems allowing the Eclipse to suit any high-tech equipment installation. A variety of sizes are available, along with several accessories to complete the product package.
HNF4 Series 304 Stainless Steel Freestanding Enclosures NEMA 4X (single door, 3pt handle). This enclosure is designed to house electrical, electronic, hydraulic or pneumatic controls. Panel mounting, rack mounting rails, inner panels and swing out frames are available to provide simple provision for mounting arrangements. Component includes protection against harsh weathering or when corrosion becomes a major problem.
These applications are designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. This application is a good solution for higher temperatures or harsh environments. Equipment is protected by insulation, allowing product to get wet or be hose down.
This enclosure is designed for use of electronic instrument enclosures, electrical junction boxes or terminal wiring enclosures.
This enclosure offers a 3-pt padlocking door handle, oil resistant gaskets, 12 gauge steel, smooth seams without knockouts, cutouts or holes. Product features NEMA rating of enclosure, user friendly handle, padlock “trigger” design for security requirements and offers an optional key lock.
Polycarbonate enclosures are designed for mounting printed circuit boards or DIN rail mounted components constructed by electronic instrument enclosures. The polycarbonate material carries a UL flammable rating of UL94 5V and is suitable for outdoors. This junction box is stainless steel any corrosion against dissimilar metals or weather changes.
Aluminum Diecast offers captive stainless steel lid screws, neoprene oil and petrol resistant gasket and a single channel fastening system.
Series 2000 Modular Console System-NEMA 12,4,4X Consolet supplies an economical housing system for operator interface applications. Panel mountings and casters are available for a variety of applications.
Polyester Modular Enclosures-NEMA 4, 4X PJ Series-Solid Cover & Inline Pushbutton Enclosures are designed specifically for housing instrument enclosures, electric, hydraulic or pneumatic controls. Modular Enclosures also provide areas for electrical junction boxes or terminal wiring enclosures. The PJ Series is equipped with a good source of insulation and protection from environmental damage. Enclosure product can withstand high temperatures or highly corrosive environments.
The Pushbutton-NEMA 4,4X 1435/1435M Stainless steel series Enclosure is designed for standard heavy duty oil tight pushbuttons, switches and pilot lights. Component has a protective shell to resist from dirt, dust, oil and large amounts of water from any angle or where highly corrosive conditions exist.
Series 2000 Modular Console System –NEMA 12,4,4X Base Units are used with other modular console components such as ( another base, terminal, desk and turret). This series offers a flexible design for panel mount or rack mount capabilities. This component is available in single or dual access formats.
The Eclipse Command System-NEMA 12 Command Enclosure is designed to enclose electronic controls, instruments and components in indoor environments. This component is best used for suspension systems and multiple mounting and full front mounting for operator interface.
NEMA 12, 13 Suspension Systems are designed for medium and heavy loads. The strength of component and cast fittings provide a highly flexible robust system.
NEMA 4, 4X Polycarbonate Modular Enclosures are designed for mounting printed circuit boards or DIN rail mounted components. This enclosure is a heavy duty for larger amounts of mounting component weight.
This Suspension System is designed for light and medium loads, strength is highly flexible for specific weight amounts.